Having efficient wiper blades is crucial when nature decides for poor weather conditions; this step-by-step guide on how to change your wiper blades will ensure you keep motoring along safely.
Wherever you live in the world, having correctly operating wiper blades is a must. It’s a procedure you should be checking during your routine car maintenance, but we all know it’s one of those parts that gets forgotten about until you need them. Changing them couldn’t be simpler, and below we’ll take you through each step of changing your wiper blades.
When to replace wiper blades
Windscreen wiper blades are a crucial safety feature that helps to ensure clear visibility while driving in various weather conditions. Over time, wiper blades become worn, damaged, and less effective, making it necessary to replace them. Experts recommend replacing wiper blades at least once a year, and in areas with extreme weather conditions or heavy rainfall, they should be replaced every six months. Although we’re all guilty of not sticking to the advice. Therefore, knowing the signs of when wiper blades need replacing is important.
To determine if your wiper blades need replacing, check for signs of wear and tear, such as streaking, skipping, or visible cracks and tears on the rubber blade. A squeaking or chattering sound while in use may also indicate that your wiper blades need to be replaced.
It’s important to replace your wiper blades as soon as you notice any of these signs. Worn or damaged wiper blades can compromise your visibility, especially during rainy or snowy weather. Regularly checking and replacing your wiper blades is an easy and inexpensive way to ensure clear visibility and safe driving conditions.
How to change wiper blades on your car
Here is a step-by-step guide on how to change the wiper blades on your car. You can repeat the process for each wiper blade that needs replacing. Remember, each car differs, but the below covers off the basics. On some vehicles, you’ll need to lift the bonnet to gain access to the wiper blade arm, so always refer to the car’s owner manual.
- Purchase the right size wiper blades for your car. Refer to the car’s owner manual or the packaging to determine the correct size.
- Carefully lift the wiper arm away from the windshield until it stays in an upright position.
- Locate the small tab or button on the underside of the wiper blade, near the center of the arm.
- Push the tab or button, then slide the wiper blade off the arm.
- Position the new wiper blade in the same location as the old one, with the hook or claw mechanism facing the arm.
- Push the wiper blade onto the arm until it clicks into place.
- Gently lower the wiper arm back down onto the windshield.
Repeat steps 2-7 for the other wiper blade if necessary.